Best eDPI for Valorant in 2026 — Pro Settings, Ranges & How to Pick Yours

Introduction

Valorant is the only major FPS where running an eDPI of 300 is considered normal. In CS2 that number would be borderline-unplayable. In Apex it would barely turn you 90 degrees. Yet TenZ, Derke, yay, and aspas all sit somewhere in the 200–600 range and dominate the scene. The reason is not preference — it is the way Valorant scales mouse input internally, and once you understand it the "best eDPI for Valorant" question becomes much less mysterious.

This guide walks through the actual Valorant eDPI sweet spot, the pros currently sitting inside it, the math that explains why the numbers look so small, and a process for choosing the value that fits your specific aim style and physical setup. If you want the numbers right away, drop your DPI and in-game sens into our eDPI Calculator — it shows your current Valorant eDPI plus cm/360° and a comparison to top Valorant pros instantly.

Why Valorant Sensitivity Looks So Small

Valorant uses a yaw value of 0.07, which is more than three times higher than Counter-Strike's 0.022. Yaw is the internal multiplier that converts raw mouse counts into in-game rotation, and a higher yaw means every count rotates the camera farther. The practical consequence: at the same DPI, a Valorant sensitivity of 0.4 produces roughly the same physical motion as a CS2 sensitivity of 1.27.

That single design decision pushed the entire Valorant sensitivity ecosystem down to a low, decimal-heavy range:

• A typical pro Valorant sensitivity sits between 0.25 and 0.75 at 800 DPI.
• A typical pro Valorant eDPI is 200–600, with a heavy cluster around 280–380.
• Translated into cm/360°, that is roughly 30–50 cm/360°, which lines up perfectly with the precision-heavy CS2 range.

So "low eDPI" in Valorant is not really low at all in physical terms. It just looks low because the yaw makes every count worth more.

If you want a deeper breakdown of how yaw distorts cross-game comparisons, see our guide on eDPI differences between popular FPS games.

The Valorant eDPI Sweet Spot

Through hundreds of streamed pro setups, the recommended Valorant eDPI band has converged on 200 to 600. Inside that band:

• 200–280 eDPI — extreme low. Heavy arm-aim, large mousepad, slow methodical playstyle. Common among Sentinel-role players who hold angles.
• 280–380 eDPI — the densest cluster. Most pros sit here, including TenZ and Derke. Balanced precision and speed.
• 380–500 eDPI — slightly faster. Common among Duelists who entry-frag and need quicker turns to challenge corners.
• 500–600 eDPI — high end. Less common at the top level, more typical of casual ranked play and players migrating from Overwatch or Apex.

Going above 600 eDPI in Valorant is unusual and almost always suggests you are compensating for something else (small mousepad, high desk, old habits from another game) rather than playing on a true preference.

Pro Valorant Settings — Updated 2026

Here is a current snapshot of top Valorant pro settings pulled from team pages and recent stream overlays. Sensitivity values assume 800 DPI unless noted.

Notice the tight cluster: every player above sits between 232 and 376 eDPI, and most are within 5 cm/360° of one another. The Valorant pro scene is one of the most standardized in FPS — if your eDPI is wildly outside this band, you are betting against years of converged opinion.

For context on how pros actually arrive at these numbers, read our deep dive on how pro players choose their mouse settings.

How to Calculate Your Valorant eDPI

The formula is identical to every other FPS:

eDPI = Mouse DPI × In-Game Sensitivity

Example: 800 DPI × 0.4 sensitivity = 320 eDPI, almost exactly TenZ territory.

Want to also check your cm/360°? Use the yaw-adjusted formula:

cm/360 = 914.4 / (eDPI × 0.07)

At 320 eDPI, that is 914.4 / (320 × 0.07) ≈ 40.8 cm/360° — meaning a full in-game rotation requires about 41 centimeters of physical mouse travel. That is squarely in the pro range.

Skip the manual math by plugging your DPI and sensitivity into our eDPI Calculator and selecting Valorant. The tool shows your eDPI, cm/360°, recommended band, and a pro comparison in one screen.

Choosing Your Valorant eDPI by Aim Style

Inside the 200–600 band, where you should sit depends on your aim mechanics:

Arm Aimers (Plant the Wrist)

Arm aimers should target 220–300 eDPI. The slower cursor speed lets your forearm do the work, which is the most reliable muscle group for precise micro-flicks on Valorant's small headshot hitboxes. This is also the band most CS2-experienced players will feel at home in.

Hybrid Aimers (Most Pros)

Most pros and ranked players are hybrid aimers — wrist for fine adjustments, arm for large rotations. Target 300–400 eDPI. The cluster is dense here because hybrid aim is the most versatile style for an FPS where you both hold angles (precision) and rotate to flanks (speed).

Wrist Aimers (Lift the Wrist)

Wrist aimers should target 400–550 eDPI. Lower than that and you will run out of pad space mid-rotation. Higher than that and even the best wrist control struggles to land Valorant's required micro-adjustments. Wrist aim is more common among ex-MOBA and ex-Overwatch players who developed quick hand mechanics elsewhere.

For more depth on the low vs high decision, see our guide on low vs high eDPI for competitive play.

Common Valorant Sensitivity Mistakes

The patterns we see ruin Valorant aim over and over:

1. Importing your CS2 eDPI directly. Because of the yaw difference, an 800 CS2 eDPI feels almost three times faster in Valorant. Always convert using cm/360° instead.
2. Running 1600 DPI without a clear reason. Most Valorant pros run 800 DPI because it produces clean decimal sensitivities (0.3, 0.4, 0.5). 1600 DPI is fine for some setups but doubles the awkwardness of the numbers you have to remember.
3. Changing sensitivity after every bad ranked match. Valorant is variance-heavy. One bad game is not data. Commit to a sensitivity for at least two weeks before evaluating — see our perfect eDPI guide for the structured process.
4. Treating scope sensitivity as a separate problem. Valorant uses an ADS sensitivity multiplier; for most pros it is left at 1.0. Changing it disconnects your hipfire and scoped muscle memory. Leave it alone unless you have a specific tracking issue.
5. Setting raw input off. Always leave Raw Input Buffer ON in Valorant. Off mode introduces tiny smoothing artifacts at low sensitivities that you will feel without being able to name.

Adapting from Other Games

Migrating to Valorant from a different FPS is one of the most common reasons players hunt for the "right" Valorant eDPI. Quick reference:

A worked example: ZywOo runs 400 DPI × 2.0 CS2 sens = 800 eDPI = ~52 cm/360°. The equivalent in Valorant would be roughly 0.63 sensitivity at 800 DPI, giving you 504 eDPI but the same 52 cm/360°.

If you want the calculation done for you with no math, our eDPI Calculator accepts any game's DPI and sensitivity and displays cm/360° — change the selected game to Valorant and adjust your in-game sensitivity until the cm/360° matches your previous game.

Should You Match a Specific Pro?

Probably not directly. Pro Valorant settings are calibrated to:

• A specific mousepad size and desk height.
• A specific monitor distance and FOV (Valorant's FOV is fixed at 103, so this part is shared).
• Years of muscle memory built on a single eDPI.
• A role with specific aim demands (Sentinels hold; Duelists entry; Initiators play around utility).

Use pro settings as starting ranges, not as direct copies. TenZ at 326 eDPI is a great starting point for any hybrid Duelist. Derke at 232 is a great starting point for arm-aim heavy players. But your final number should be the one your hand commits to over weeks of stable play.

Frequently Asked Questions

What is the best eDPI for Valorant in 2026?

The most common pro range is 280–380 eDPI, with the densest cluster around 300–340. Start there and adjust by ±50 eDPI based on whether you overshoot (lower) or undershoot (raise) consistently.

What eDPI does TenZ use in Valorant?

TenZ runs 800 DPI × 0.408 sensitivity = 326 eDPI, equivalent to roughly 40 cm/360°. This has been his approximate setting for years across CSGO and Valorant.

Is 400 eDPI good for Valorant?

Yes — 400 eDPI is inside the recommended Valorant band and slightly above the most common pro cluster. It suits hybrid aimers with average-sized mousepads who want a touch more rotational speed than the typical pro setup.

Why is Valorant sensitivity so much lower than CS2?

Valorant's internal yaw is 0.07 versus CS2's 0.022 — over three times higher. That means the same eDPI rotates the camera roughly 3× farther in Valorant, so pros use proportionally lower sensitivity values to land the same physical cm/360°.

Should I use 400 or 800 DPI for Valorant?

Use 800 DPI. It is the cross-mouse standard, produces clean decimal sensitivities at typical Valorant eDPI ranges, and matches almost every Valorant pro. 400 is fine if your target eDPI lands at an awkward sensitivity value at 800, but 800 is the safer default.

Does mouse acceleration affect Valorant eDPI?

eDPI itself is a mathematical product of DPI × sensitivity and is unaffected by acceleration. However, mouse acceleration changes how your cursor *feels* at any eDPI — Valorant pros universally disable Windows mouse acceleration and use Raw Input Buffer ON for consistent, linear input.

What is the lowest Valorant eDPI a pro uses?

Derke at Fnatic runs 232 eDPI (800 DPI × 0.29), one of the lowest in the top-tier scene. Some IGLs and Sentinels run slightly lower (200–220), but going below 200 generally requires an unusually large mousepad and dedicated arm aim.

Conclusion

The best eDPI for Valorant in 2026 is the one inside the 200–600 band that fits your aim style, your physical setup, and that you will stay on long enough for muscle memory to do its job. The pro cluster sits at 280–380 because that is the convergence of decades of optimization across CSGO and Valorant — start there unless you have a specific reason to push higher or lower.

Use our free eDPI Calculator to drop in your current DPI and sensitivity, see your Valorant eDPI and cm/360° instantly, and compare against the pros above. Then commit for two weeks before adjusting — that is the part nobody skips and still improves.